Subject 1: Engineering Mathematics
Linear Algebra: Matrix algebra, Systems of linear equations, Eigen values and eigenvectors.
Calculus: Functions of single variable, Limit, continuity and differentiability, Taylor series, Mean value theorems, Evaluation of definite and improper integrals, Partial derivatives, Total derivative, Maxima and minima, Gradient, Divergence and Curl, Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green’s theorems.
Differential equations: First order equations (linear and nonlinear), Higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, Initial and boundary value problems, Laplace transforms, Solutions of
Complex variables: Complex number, polar form of complex number, triangle inequality.
Probability and Statistics: Definitions of probability and sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Poisson, Normal and Binomial distributions, Linear regression analysis.
Numerical Methods: Numerical solutions of linear and
Subject 2: Process Calculations and Thermodynamics
Steady and unsteady state mass and energy balances including multiphase,
First and Second laws of thermodynamics. Applications of first law to close and open systems. Second law and Entropy. Thermodynamic properties of pure substances: Equation of State and residual properties, properties of mixtures: partial molar properties, fugacity, excess properties and activity coefficients; phase equilibria: predicting VLE of systems; chemical reaction equilibrium.
Subject 3: Fluid Mechanics and Mechanical Operations
Fluid statics, surface tension, Newtonian and
Subject 4: Heat Transfer
Equation of energy, steady and unsteady heat conduction, convection and radiation, thermal boundary layer and heat transfer coefficients, boiling, condensation and evaporation; types of heat exchangers and evaporators and their process calculations; design of double pipe, shell and tube heat exchangers, and single and multiple effect evaporators.
Subject 5: Mass Transfer
Fick’s laws, molecular diffusion in fluids, mass transfer coefficients, film, penetration and surface renewal theories; momentum, heat and mass transfer analogies;
Subject 6: Chemical Reaction Engineering
Theories of reaction rates; kinetics of homogeneous reactions, interpretation of kinetic data, single and multiple reactions in ideal reactors, kinetics of enzyme reactions
Subject 7: Instrumentation and Process Control
Measurement of process variables; sensors and transducers; P&ID equipment symbols; process modeling and linearization, transfer functions and dynamic responses of various systems, systems with inverse response, process reaction curve, controller modes (P, PI, and PID); control valves; transducer dynamics; analysis of closed loop systems including stability, frequency response, controller tuning, cascade and feed forward control.
Subject 8: Plant Design and Economics
Principles of process economics and cost estimation including depreciation and total annualized cost, cost indices, rate of return, payback period, discounted cash flow, optimization in process design and sizing of chemical engineering equipment’s such as heat exchangers and multistage contactors.
Subject 9: Chemical Technology
Inorganic chemical industries (sulfuric acid, phosphoric acid,
Subject 1: Engineering Mathematics
Linear Algebra: Matrix algebra; Systems of linear equations; Eigen values and Eigen vectors.
Calculus: Functions of single variable; Limit, continuity and differentiability; Mean value theorems, local maxima and minima; Taylor series; Evaluation of definite and indefinite integrals, application of definite integral to obtain area and volume; Partial derivatives; Total derivative; Gradient, Divergence and Curl, Vector identities; Directional derivatives; Line, Surface and Volume integrals.
Ordinary Differential Equation (ODE): First order (linear and
Probability and Statistics: Sampling theorems; Conditional probability; Descriptive statistics – Mean, median, mode and standard deviation; Random Variables – Discrete and Continuous, Poisson and Normal Distribution; Linear regression.
Numerical Methods: Error analysis. Numerical solutions of linear and
Subject 2: Engineering Mechanics and Solid Mechanics
Engineering Mechanics: System of forces,
Solid Mechanics: Bending moment and shear force in statically determinate beams; Simple stress and strain relationships; Simple bending theory, flexural and shear stresses, shear centre; Uniform torsion, Transformation of stress; buckling of column, combined and direct bending stresses.
Subject 3: Structural Analysis and Construction Materials and Management
Statically determinate and indeterminate structures by force/ energy methods; Method of superposition; Analysis of trusses, arches, beams, cables and frames;
Displacement methods: Slope deflection and moment distribution methods; Influence lines; Stiffness and flexibility methods of structural analysis.
Construction Materials and Management: Construction Materials: Structural Steel – Composition, material properties and behaviour; Concrete - Constituents, mix design,
Subject 4: Concrete Structures
Working stress and Limit state design concepts; Design of beams, slabs, columns; Bond and development length; Prestressed concrete beams.
Steel Structures: Working stress and Limit state design concepts; Design of tension and compression members, beams and beam- columns, column bases; Connections - simple and eccentric,
Subject 5: Geotechnical Engineering
Stability of slopes – Finite and infinite slopes, Bishop’s method; Stress distribution in soils
capacity theories, effect of water table; Combined footing and raft foundation; Contact pressure; Settlement analysis in sands and clays; Deep foundations – dynamic and static formulae, Axial load capacity of piles in sands and clays, pile load test, pile under lateral loading, pile group efficiency, negative skin friction.
Subject 6: Fluid Mechanics
Properties of fluids, fluid statics; Continuity, momentum and energy equations and their applications; Potential flow, Laminar and turbulent flow; Flow in pipes, pipe networks; Concept of boundary layer and its growth; Concept of lift and drag.
Subject 7: Hydraulics and Irrigation
Forces on immersed bodies; Flow measurement in channels and pipes; Dimensional analysis and hydraulic similitude; Channel Hydraulics -
Irrigation: Types of irrigation systems and methods; Crop water requirements - Duty, delta, evapo transpiration; Gravity Dams and Spillways; Lined and unlined canals, Design of weirs on permeable foundation; cross drainage structures.
Subject 8: Environmental Engineering
Water and Waste Water Quality and Treatment: Basics of water quality standards – Physical, chemical and biological parameters; Water quality index; Unit processes and operations; Water requirement; Water distribution system; Drinking water treatment. Sewerage system design, quantity of domestic wastewater, primary and secondary treatment. Effluent discharge standards; Sludge disposal; Reuse of treated sewage for different applications.
Air Pollution: Types of pollutants, their sources and impacts, air pollution control, air quality standards, Air quality Index and limits.
Municipal Solid Wastes: Characteristics, generation, collection and transportation of solid wastes, engineered systems for solid waste management (reuse/ recycle, energy recovery, treatment and disposal).
Subject 9: Transportation Engineering
Transportation Infrastructure: Geometric design of highways -
Geometric design of railway Track – Speed and Cant.
Concept of airport runway length, calculations and corrections; taxiway and exit taxiway design.
Highway Pavements: Highway materials - desirable properties and tests; Desirable properties of
bituminous paving mixes; Design factors for flexible and rigid pavements; Design of flexible and rigid pavement using IRC codes
Traffic Engineering: Traffic studies on flow and speed, peak hour factor, accident study, statistical analysis of traffic data; Microscopic and macroscopic parameters of traffic flow, fundamental relationships; Traffic signs; Signal design by Webster’s method; Types of intersections; Highway capacity.
Subject 10: Geomatics Engineering
Principles of surveying; Errors and their adjustment; Maps - scale, coordinate system; Distance and angle measurement - Levelling and trigonometric levelling; Traversing and triangulation survey; Total station; Horizontal and vertical curves.
Photogrammetry and Remote Sensing - Scale, flying height; Basics of remote sensing and GIS.
Subject 1: Engineering Mathematics
Discrete Mathematics: Propositional and first order logic. Sets, relations, functions, partial orders and
lattices. Monoids, Groups. Graphs: connectivity, matching, coloring. Combinatorics: counting, recurrence relations, generating functions.
Linear Algebra: Matrices, determinants, system of linear equations, eigenvalues and eigenvectors, LU decomposition.
Calculus: Limits, continuity and differentiability. Maxima and minima. Mean value theorem. Integration.
Probability and Statistics: Random variables. Uniform, normal, exponential, poisson and binomial distributions. Mean, median, mode and standard deviation. Conditional probability and Bayes theorem.
Subject 2: Digital Logic
Boolean algebra. Combinational and sequential circuits. Minimization. Number representations and computer arithmetic (fixed and floating point).
Subject 3: Computer Organization and Architecture
Machine instructions and addressing modes. ALU,
Subject 4: Programming and Data Structures
Programming in C. Recursion. Arrays, stacks, queues, linked lists, trees, binary search trees, binary heaps, graphs.
Subject 5: Algorithms
Searching, sorting, hashing. Asymptotic worst case time and space complexity. Algorithm design techniques: greedy, dynamic programming and
Subject 6: Theory of Computation
Regular expressions and finite automata.
Subject 7: Compiler Design
Lexical analysis, parsing,
Subject 8: Operating System
System calls, processes, threads,
Subject 9: Databases
Subject 10: Computer Networks
Concept of layering: OSI and TCP/IP Protocol Stacks; Basics of packet, circuit and virtual circuit switching;
Data link layer: framing, error detection, Medium Access Control, Ethernet bridging;
Routing protocols: shortest path, flooding, distance vector and link state routing; Fragmentation and IP addressing, IPv4, CIDR notation, Basics of IP support protocols (ARP, DHCP, ICMP), Network Address Translation (NAT); Transport layer: flow control and congestion control, UDP, TCP, sockets; Application layer protocols: DNS, SMTP, HTTP, FTP, Email.
Subject 1: Engineering Mathematics
Linear Algebra: Matrix Algebra, Systems of linear equations, Eigenvalues, Eigenvectors.
Calculus: Mean value theorems, Theorems of integral calculus, Evaluation of definite and improper integrals, Partial Derivatives, Maxima and minima, Multiple integrals, Fourier series, Vector identities, Directional derivatives, Line integral, Surface integral, Volume integral, Stokes’s theorem, Gauss’s theorem, Divergence theorem, Green’s theorem.
Differential equations: First order equations (linear and nonlinear), Higher order linear differential equations with constant coefficients, Method of variation of parameters, Cauchy’s equation, Euler’s equation, Initial and boundary value problems, Partial Differential Equations, Method of separation of variables.
Complex variables: Analytic functions, Cauchy’s integral theorem, Cauchy’s integral formula, Taylor series, Laurent series, Residue theorem, Solution integrals.
Probability and Statistics: Sampling theorems, Conditional probability, Mean, Median, Mode, Standard Deviation, Random variables, Discrete and Continuous distributions, Poisson distribution, Normal distribution, Binomial distribution, Correlation analysis, Regression analysis.
Subject 2: Electric circuits
Network elements: ideal voltage and current sources, dependent sources, R, L, C, M elements; Network
solution methods: KCL, KVL, Node and Mesh analysis; Network
Theorems: Thevenin’s, Norton’s, Superposition and Maximum Power Transfer theorem; Transient response of dc and ac networks, sinusoidal
Subject 3: Electromagnetic Fields
Coulomb's Law, Electric Field Intensity, Electric Flux Density, Gauss's Law, Divergence, Electric field and potential due to point, line, plane and spherical charge distributions, Effect of dielectric medium, Capacitance of simple configurations,
Subject 4: Signals and Systems
Representation of continuous and discrete time signals, shifting and scaling properties, linear time invariant and causal systems, Fourier series representation of continuous and discrete time periodic signals, sampling theorem, Applications of Fourier Transform for continuous and discrete time signals, Laplace Transform and Z transform. R.M.S. value, average value calculation for any general periodic waveform
Subject 5: Electrical Machines
Single phase transformer: equivalent circuit, phasor diagram, open circuit and short circuit tests, regulation and efficiency;
Subject 6: Power Systems
Basic concepts of electrical power generation, ac and dc transmission concepts, Models and performance of transmission lines and cables, Economic Load Dispatch (with and without considering transmission losses), Series and shunt compensation, Electric field distribution and insulators, Distribution systems,
Subject 7: Control Systems
Mathematical modeling and representation of systems, Feedback principle, transfer function, Block diagrams and Signal flow graphs, Transient and
Subject 8: Electrical and Electronic Measurements
Bridges and Potentiometers, Measurement of voltage, current, power, energy and power factor; Instrument transformers, Digital voltmeters and multimeters, Phase, Time and Frequency measurement; Oscilloscopes, Error analysis.
Subject 9: Analog and Digital Electronics
Simple diode circuits: clipping, clamping, rectifiers; Amplifiers: biasing, equivalent circuit and frequency response; oscillators and feedback amplifiers; operational amplifiers: characteristics and applications; single stage active filters, Active Filters: Sallen Key, Butterwoth, VCOs and timers, combinatorial and sequential logic circuits, multiplexers, demultiplexers, Schmitt triggers, sample and hold circuits, A/D and D/A converters.
Subject 10: Power Electronics
Subject 1: Engineering Mathematics
Linear Algebra: Vector space, basis, linear dependence and independence, matrix algebra, eigenvalues and eigenvectors, rank, solution of linear equations- existence and uniqueness.
Calculus: Mean value theorems, theorems of integral calculus, evaluation of definite and improper integrals, partial derivatives, maxima and minima, multiple integrals, line, surface and volume integrals, Taylor series.
Differential Equations: First order equations (linear and nonlinear), higher order linear differential equations, Cauchy's and Euler's equations, methods of solution using variation of parameters, complementary function and particular integral, partial differential equations, variable separable method, initial and boundary value problems.
Vector Analysis: Vectors in plane and space, vector operations, gradient, divergence and curl, Gauss's, Green's and Stokes’ theorems.
Complex Analysis: Analytic functions, Cauchy’s integral theorem, Cauchy’s integral formula, sequences, series, convergence tests, Taylor and Laurent series, residue theorem.
Probability and Statistics: Mean, median, mode, standard deviation, combinatorial probability, probability distributions, binomial distribution, Poisson distribution, exponential distribution, normal distribution, joint and conditional probability.
Subject 2: Networks
Circuit analysis: Node and mesh analysis, superposition, Thevenin's theorem, Norton’s theorem, reciprocity. Sinusoidal steady state analysis: phasors, complex power, maximum power transfer.
Time and frequency domain analysis of linear circuits: RL, RC and RLC circuits, solution of network equations using Laplace transform.
Subject 3: Signals and Systems
LTI systems: definition and properties, causality, stability, impulse response, convolution, poles and zeroes, frequency response, group delay, phase delay.
Subject 4: Electronic Devices
Energy bands in intrinsic and extrinsic semiconductors, equilibrium carrier concentration, direct and indirect
Carrier transport: diffusion current, drift current, mobility and resistivity, generation and recombination of carriers, Poisson and continuity equations.
Subject 5: Analog Circuits
Diode circuits: clipping, clamping and rectifiers. BJT and MOSFET amplifiers: biasing, ac coupling, small signal analysis, frequency response. Current mirrors and differential amplifiers.
Subject 6: Digital Circuits
Number representations: binary, integer and
Combinatorial circuits: Boolean algebra, minimization of functions using Boolean identities and Karnaugh map, logic gates and their static CMOS implementations, arithmetic circuits, code converters, multiplexers, decoders.
Sequential circuits: latches and
Data converters: sample and hold circuits, ADCs and DACs.
Semiconductor memories: ROM, SRAM, DRAM.
Computer organization: Machine instructions and addressing modes, ALU,
Subject 7: Control Systems
Basic control system components; Feedback principle; Transfer function; Block diagram representation; Signal flow graph; Transient and
Subject 8: Communications
Random processes: autocorrelation and power spectral density, properties of white noise, filtering of random signals through LTI systems.
Analog communications: amplitude modulation and demodulation, angle modulation and demodulation, spectra of AM and FM, superheterodyne receivers.
Information theory: entropy, mutual information and channel capacity theorem.
Digital communications: PCM, DPCM, digital modulation schemes (ASK, PSK, FSK, QAM), bandwidth,
Subject 9: Electromagnetics
Maxwell's equations: differential and integral forms and their interpretation, boundary conditions, wave equation, Poynting vector. Plane waves and properties: reflection and refraction, polarization, phase and group velocity, propagation through various media, skin depth.
Transmission lines: equations, characteristic impedance, impedance matching, impedance transformation,
Subject 1: Engineering Mathematics
Linear Algebra: Matrix algebra, systems of linear equations, eigenvalues and eigenvectors.
Calculus: Functions of single variable, limit, continuity and differentiability, mean value theorems, indeterminate forms; evaluation of definite and improper integrals; double and triple integrals; partial derivatives, total derivative, Taylor series (in one and two variables), maxima and minima, Fourier series; gradient, divergence and curl, vector identities, directional derivatives, line, surface and volume integrals, applications of Gauss, Stokes and Green’s theorems.
Differential equations: First order equations (linear and nonlinear); higher order linear differential equations with constant coefficients;
Complex variables: Analytic functions;
Probability and Statistics: Definitions of probability, sampling theorems, conditional probability; mean, median, mode and standard deviation; random variables, binomial, Poisson and normal distributions.
Numerical Methods: Numerical solutions of linear and
Subject 2: Engineering Mechanics and Mechanics of Materials
Subject 3: Theory of Machines
Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of linkages; cams; gears and gear trains; flywheels and governors; balancing of reciprocating and rotating masses; gyroscope.
Vibrations: Free and forced vibration of single degree of freedom systems, effect of damping; vibration isolation; resonance; critical speeds of shafts.
Subject 4: Machine Design
Design for static and dynamic loading; failure theories; fatigue strength and the SN diagram; principles of the design of machine elements such as bolted, riveted and welded joints; shafts, gears, rolling and sliding contact bearings, brakes and clutches, springs.
Subject 5: Fluid Mechanics
Fluid properties; fluid statics, forces on submerged bodies, stability of floating bodies;
Modes of heat transfer; one dimensional heat conduction, resistance concept and electrical analogy, heat transfer through fins; unsteady heat conduction, lumped parameter system, Heisler's charts; thermal boundary layer, dimensionless parameters in free and forced convective heat transfer, heat transfer correlations for flow over flat plates and through pipes, effect of turbulence; heat exchanger performance, LMTD and NTU methods; radiative heat transfer, Stefan Boltzmann law, Wien's displacement law, black and grey surfaces, view factors, radiation network analysis
Subject 7: Thermodynamics
Thermodynamic systems and processes; properties of pure substances, behavior of ideal and real gases; zeroth and first laws of thermodynamics, calculation of work and heat in various processes; second law of thermodynamics; thermodynamic property charts and tables, availability and irreversibility; thermodynamic relations.
Applications: Power Engineering: Air and gas compressors; vapour and gas power cycles, concepts of regeneration and reheat. I.C. Engines:
Subject 8: Materials, Manufacturing and Industrial Engineering
Engineering Materials: Structure and properties of engineering materials, phase diagrams, heat treatment,
Casting, Forming and Joining Processes: Different types of castings, design of patterns, moulds and cores; solidification and cooling; riser and gating design. Plastic deformation and yield criteria; fundamentals of hot and cold working processes; load estimation for bulk (forging, rolling, extrusion, drawing) and sheet (shearing, deep drawing, bending) metal forming processes; principles of powder metallurgy. Principles of welding, brazing, soldering and adhesive bonding.
Machining and Machine Tool Operations: Mechanics of machining; basic machine tools; single and
Metrology and Inspection: Limits, fits and tolerances; linear and angular measurements; comparators; interferometry; form and finish measurement; alignment and testing methods; tolerance analysis in manufacturing and assembly; concepts of
Computer Integrated Manufacturing: Basic concepts of CAD/CAM and their integration tools; additive manufacturing.
Subject 9: Production Planning and Control
Forecasting models, aggregate production planning, scheduling, materials requirement planning; lean manufacturing.
Inventory Control: Deterministic models; safety stock inventory control systems.
Operations Research: Linear programming, simplex method, transportation, assignment, network flow models, simple queuing models, PERT and CPM.
|10/10/2022||05:00 PM- 11:00 PM||Subject 2: Process Calculations and Thermodynamics|
|17/10/2022||05:00 PM- 11:00 PM||Subject 3: Fluid Mechanics and Mechanical Operations|
|24/10/2022||05:00 PM- 11:00 PM||Subject 4: Heat Transfer|
|31/10/2022||05:00 PM- 11:00 PM||Subject 5: Mass Transfer|
|07/11/2022||05:00 PM- 11:00 PM||Subject 6: Chemical Reaction Engineering|
|14/11/2022||05:00 PM- 11:00 PM||Subject 7: Instrumentation and Process Control|
|21/11/2022||05:00 PM- 11:00 PM||Subject 8: Plant Design and Economics|
|28/11/2022||05:00 PM- 11:00 PM||Subject 9: Chemical Technology|
|05/12/2022||05:00 PM – 11:00 PM||Subject 1: Engineering Mathematics|
|12/10/2022||05:00 PM- 11:00 PM||Subject 2: Engineering Mechanics and Solid Mechanics|
|19/10/2022||05:00 PM- 11:00 PM||Subject 3: Structural Analysis and Construction Materials and Management|
|26/10/2022||05:00 PM- 11:00 PM||Subject 4: Concrete Structures|
|02/11/2022||05:00 PM- 11:00 PM||Subject 5: Geotechnical Engineering|
|10/11/2022||05:00 PM- 11:00 PM||Subject 6: Fluid Mechanics|
|16/11/2022||05:00 PM- 11:00 PM||Subject 7: Hydraulics and Irrigation|
|23/11/2022||05:00 PM- 11:00 PM||Subject 8: Environmental Engineering|
|30/11/2022||05:00 PM- 11:00 PM||Subject 9: Transportation Engineering|
|07/12/2022||05:00 PM – 11:00 PM||Subject 10: Geomatics Engineering|
|14/12/2022||05:00 PM – 11:00 PM||Subject 1: Engineering Mathematics|
|15/10/2022||05:00 PM- 11:00 PM||Subject 2: Digital Logic|
|22/10/2022||05:00 PM- 11:00 PM||Subject 3: Computer Organization and Architecture|
|29/10/2022||05:00 PM- 11:00 PM||Subject 4: Programming and Data Structures|
|05/11/2022||05:00 PM- 11:00 PM||Subject 5: Algorithms|
|13/11/2022||05:00 PM- 11:00 PM||Subject 6: Theory of Computation|
|19/11/2022||05:00 PM- 11:00 PM||Subject 7: Compiler Design|
|26/11/2022||05:00 PM- 11:00 PM||Subject 8: Operating System|
|03/12/2022||05:00 PM- 11:00 PM||Subject 9: Databases|
|10/12/2022||05:00 PM – 11:00 PM||Subject 10: Computer Networks|
|17/12/2022||05:00 PM – 11:00 PM||Subject 1: Engineering Mathematics|
|11/10/2022||05:00 PM- 11:00 PM||Subject 2: Electric circuits|
|18/10/2022||05:00 PM- 11:00 PM||Subject 3: Electromagnetic Fields|
|25/10/2022||05:00 PM- 11:00 PM||Subject 4: Signals and Systems|
|01/11/2022||05:00 PM- 11:00 PM||Subject 5: Electrical Machines|
|09/11/2022||05:00 PM- 11:00 PM||Subject 6: Power Systems|
|15/11/2022||05:00 PM- 11:00 PM||Subject 7: Control Systems|
|22/11/2022||05:00 PM- 11:00 PM||Subject 8: Electrical and Electronic Measurements|
|29/11/2022||05:00 PM- 11:00 PM||Subject 9: Analog and Digital Electronics|
|06/12/2022||05:00 PM – 11:00 PM||Subject 10: Power Electronics|
|13/12/2022||05:00 PM – 11:00 PM||Subject 1: Engineering Mathematics|
|13/10/2022||05:00 PM- 11:00 PM||Subject 2: Networks|
|20/10/2022||05:00 PM- 11:00 PM||Subject 3: Signals and Systems|
|27/10/2022||05:00 PM- 11:00 PM||Subject 4: Electronic Devices|
|03/11/2022||05:00 PM- 11:00 PM||Subject 5: Analog Circuits|
|11/11/2022||05:00 PM- 11:00 PM||Subject 6: Digital Circuits|
|19/11/2022||05:00 PM- 11:00 PM||Subject 7: Control Systems|
|24/11/2022||05:00 PM- 11:00 PM||Subject 8: Communications|
|01/12/2022||05:00 PM- 11:00 PM||Subject 9: Electromagnetics|
|08/12/2022||05:00 PM – 11:00 PM||Subject 1: Engineering Mathematics|
|14/10/2022||05:00 PM- 11:00 PM||Subject 2: Engineering Mechanics and Mechanics of Materials|
|21/10/2022||05:00 PM- 11:00 PM||Subject 3: Theory of Machines|
|28/10/2022||05:00 PM- 11:00 PM||Subject 4: Machine Design|
|04/11/2022||05:00 PM- 11:00 PM||Subject 5: Fluid Mechanics|
|12/11/2022||05:00 PM- 11:00 PM||Subject 6:
|18/11/2022||05:00 PM- 11:00 PM||Subject 7: Thermodynamics|
|25/11/2022||05:00 PM- 11:00 PM||Subject 8: Materials, Manufacturing and Industrial Engineering|
|02/12/2022||05:00 PM- 11:00 PM||Subject 9: Production Planning and Control|
|09/12/2022||05:00 PM – 11:00 PM||Subject 1: Engineering Mathematics|